designed & dimensioned in millimeters[inches] do not scale from this print 1.00 ref .039 "e" ref 1.25 .049 ref 0.23 .009 ref "a" "a" qrf8-xxx-xx.x-dv-xx (see table 3) "a" ref "b" ref "c" 0.80 (typ) .031 (tol non accum) 24.80 (typ) .976 c c 103 104 01 02 e qrf8-xxx-xx.x-x-d-xx-a-xx no of positions lead style -05.0 = 5mm -07.0 = 7mm plating specification -l: light selective gold / matte tin (use c-266-xx.x-l & t-1g39-xx.x-l) -s: selective gold / matte tin (use c-266-xx.x-s & t-1g39-xx.x-s) -d: double vertical row specification option -026, -052 & -078 (-018, -036, & -054 for -dp only) -gp: guide post (sheet 3, fig 3) (see note 8) -k: polyimide film pad -tr: tape & reel (see note 4) -a: alignment pin option -dp: differential pairs option ref "d" 0.80 (typ) .031 (tol non accum) 1.20 .047 ref "c" 'b' c l c l c c 1.45 0.12 .057 .005 1.16 ref .046 "f" 0.08 (see notes 5, 6, 7 & 9) 4.41 .173 1.04 ref .041 4.60 ref .181 0.20 .008 ref section "a"-"a" scale 5 : 1 c c-266-xx.x-x (see table 3) c l c c c t-1g39-xx.x-x (see table 3) (see note 5) see table 1 c fig 1 (qrf8-052-05.0-x-d-a shown) sheet of unless otherwise specified, dimensions are in millimeters [inches]. tolerances are: decimals angles x.x: 0.3 [.01] 2 x.xx: 0.13 [.005] x.xxx: 0.050 [.0020] material: .8mm q-rate socket assembly by: qrf8-xxx-xx.x-x-d-xx-a-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing m murillo 7/10/2008 4 1 sheet scale: 2:1 insulator: lcp, color: black contact: becu ground plane: phos bronze f:\dwg\misc\mktg\qrf8-xxx-xx.x-x-d-xx-a-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 notes: 1. represents a critical dimension. 2. burr allowance: 0.038[.0015] max. 3. minimum pushout force: signal: 1.80 n [.4 lb.] ground plane 4.44 n [1 lb.] 4. parts to be packaged in trays, unless -tr option is specified. -054 & -078 position not available in tape and reel. 5. dimension applies to contacts & ground plane. 6. ground plane press height must be .003 [.08] less than the max height or .001 [.03] greater than the minimum height of the terminal. 7. max variance of 0.05 [.002] 8. parts with the -gp option must mate to -gp optioned qrm8 parts and parts with non -gp option must mate to non-gp optioned qrm8 parts 9. ground plane air pressure to be set at 20-25 psi revision e
5.00 .197 "g"0.50 [.020] 0.20 0.50 .008 .020 f f 3 max sway (typ) c-266-xx.x-x (all tails same direction) in process 1 cut c-266-xx.x-x contact combs 0.78 .031 ref 1.00 .039 ref detail 'b' scale 5 : 1 1.45 0.12 .057 .005 "f" (see note 7) e in process 2 fill c-266-xx.x-x contacts c c see table 1 0.11 0.076 .004 .003 "h" 0.08 section f-f scale 2.5 : 1 fig 2 -k option (use k-dot-.197-.344-.005) (qrf8-052-05.0-x-d-a-k shown ) (same as fig 1 different as shown) critical dimension inspection table assembly operation start up inspection inspect code a in-process inspection inspect code b in-process 1 c9 in-process 2 c5, c6 finished good c1, c2, c3, c4, c5, c6, c7, c8 sheet of .8mm q-rate socket assembly by: qrf8-xxx-xx.x-x-d-xx-a-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing m murillo 7/10/2008 4 2 sheet scale: 2:1 revision e f:\dwg\misc\mktg\qrf8-xxx-xx.x-x-d-xx-a-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"j" ref "k" ref 0.11 0.076 .004 .003 3 max sway fig 8 (qrf8-026-05.0-x-d-a-gp shown) (same as fig 2 different as shown) scale 4:1 in process 3 cut c-266-xx.x-x contact combs (for qrf8-018-05.0-x-d-dp-a-gp) sheet of .8mm q-rate socket assembly by: qrf8-xxx-xx.x-x-d-xx-a-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing m murillo 7/10/2008 4 3 sheet scale: 4:1 revision e f:\dwg\misc\mktg\qrf8-xxx-xx.x-x-d-xx-a-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
fig 9 (qrf8-036-05.0-x-d-dp-a-gp shown) (same as fig 8 different as shown) scale 4:1 "g" "g" fig 10 (qrf8-078-05.0-x-d-a shown) (different as shown for all 3 bank assemblies) scale 4:1 scallops removed 3.76 .148 ref section "g"-"g" sheet of .8mm q-rate socket assembly by: qrf8-xxx-xx.x-x-d-xx-a-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing m murillo 7/10/2008 4 4 sheet scale: 4:1 revision e f:\dwg\misc\mktg\qrf8-xxx-xx.x-x-d-xx-a-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
